This interface cable is required when configuring XMD valve drivers using CANpoint XMD configuration software,
The circuit board is protected by a conformal coating to resist end environmental conditions.
The CAN active LED flashes green when a CAN message has been successfully received and red after any CAN bus errors. USB leds provide the same functionality for USB communication activities.
The interface is powered by the computer's USB bus.
Includes Deutsch 3-way socket and 120 ohm terminal resistor. You also need a 120 ohm resistor in the network.
The USB cable is about 16 feet (4.9 m) long and CAN connect about 1 foot (0.3 m) long.